How To Shorten Outdoor String Lights

How To Shorten Outdoor String Lights

If you are looking to shorten your outdoor string lights, there are a few common techniques that can be used. If you have any questions or want to learn more about shortening outdoor string lights, then be sure to check out our blog!

You Will  Need  Supplies

  • Sharp scissors
  • Tape measure
  • String
  • Cord
  • String bulb
  • Electrical tape
  • Wire cutter

Keep it short

It is important to keep it short. Short lights look more professional and classy. If you need to use multiple strings of light for a small area, consider using smaller ones instead of longer light. Short lights are also less likely to be damaged if the wind blows during the night.

First, Determine The Length Of Your String Light

First, you need to determine the length of your string light. The length of your it should be determined in order to make the most of your space. With that said, here is how to shorten  string light. 

The first step is to determine the size of your yard. This will allow you to choose the best length. Once you have determined the size of your yard, it is important to decide on the type of light that you want.

One benefit of using light bulbs with led chips is that they can be easily shortened without having any major changes made to your set up. Just cut off one end of the light bulb and insert it into the other end of the chip.

Cut To Desired Length

Cut to desired length. The longer the string, the more likely that someone will trip on it. You could always cut it shorter, but the longer it is the harder it will be to fix. Cutting the cord too short will cause a loose fit and may also cause a kinked cord. Kinks can lead to breakage. Cutting the cord too long will leave an unattractive mess. You can always cut it down to a smaller size, but the longer the cord the more likely that it will fray and fall apart.

Connect The Ends Together

One way is to attach the ends of the string lights together. This will help reduce the amount of space each light needs to use, and it also lets you control how long each light stays on. Another option is to use T-shaped wire hangers. This will give you more control over where each light shines and make it easier to find at night.

Twist Around A Key Ring Or Post

Twist around a key ring or post to shorten the length . First, find a length of twine with enough slack to wrap around the key ring. Next, wind the twine around the key ring until you reach the desired length. This works because the key ring will pull the twine tighter. Use this technique to make string lights  Shorten.

Hang Your String Light From Short Wires Or Aluminum Telescoping Tubes

Aluminum Telescoping Tubes Method:

There are a couple different ways to shorten outside string light. You can use short wires or aluminum telescoping tubes to do so. Both methods have their own pros and cons.

Short Wire Method:

The short wire method is the most popular way to shorten outside string light. This method uses short, lightweight wires to connect each light fitting to the main power supply. This method is easy to follow and works great for small spaces. However, this method can be quite expensive.

Aluminum Telescoping Tube Method:

The aluminum telescoping tube method is a more common way to shorten outdoor string lights. This method uses long, heavy tubes to connect each light fitting to the main power supply. This method is more expensive but also more complex than the short wire method.

Shortening  Light Wired In Parallel

The best way to reduce this is to use short lengths of wire that are connected in parallel. This works well for stringing Christmas lights as they are wired with 20-40w bulbs and you need 10 or more to light a tree. For this, you need to check and find the wattage for each bulb you are using.

If you need to cut a length of wire for this project, start by buying a wire cutter. A common type of wire cutter is made from a pair of pliers and a knife blade. These types of wire cutters come in different sizes, which is important when making any type of cut. When cutting the wire, make sure that you keep a sharp edge against the material that you are cutting.

Using a sharp blade will help you make accurate cuts and prevent cuts from becoming too jagged. When using wire cutters to shorten outside string light, the wire is wrapped around the handle of the pliers and a blade is inserted between the handle and

Avoid Brightness Levels

Bright light can be a problem for string light outdoors. It causes the bulbs to glow so brightly that they burn out quickly. In addition, if you’re using the same bulb for the string light as for your security system, it can interfere with the signals coming through. The best way to avoid these problems is to use bulbs with low brightness levels. They should glow with just enough light to illuminate your yard, but not so bright as to cause problems.

Benefits of outdoor Shorten string light

One benefit of having outside string light is that they provide an all-natural light source that’s both practical and attractive. Not only does it look great outside your home, but it can also save you money. They will also keep the inside of your house cooler at night, which can help to prevent your air conditioning from running as much.


It is important to shorten outdoor string lights. Doing so will help keep your home and property illuminated at night while reducing the amount of power needed to operate them.

About The Author

Scroll to Top